ATPColor Ink Solutions Karta 1.1

A Complete Range of Sublimation Ink


Digital sublimatic/disperse inks AtpInk-Karta 1.1 are particularly suitable for ink-jet printing on small or large plotters using Kyocera piezo printing heads. They are used to print ink-jet transfer paper which, through the sublimation heating process, releases the dyes into the polyester fibers permanently coloring the sintetic fabric themselves.


Key Features

High quality, vivid and brilliant colours

Very good saturation grade

Excellent printability with Kyocera piezo heads

Fast drying on ink-jet coated paper

Excellent image definition after the heat transfer process

Very Good ink fastness



Printing on polyester and polyammid (lycra, nylon) fabrics used in sportswear and outer wear in general

Printed on mixed syntetic fabrics (min 50% of synthetic fibers) used in sportswear and outer wear in general

Printing on plastic substrates used in the manufacturing of sport equipment such as skiis, snowboards, skateboards, windsurfs, etc.

Printing on every substrates (wood, ceramics, glass) overprinted with polyester-based or polyammid-based coatings


Transfer Condition

Can vary from 30 to 60 seconds at 180°-210°C according to the type of substrate


Important notice

We strongly suggest to always carry out pretest of printing, drying and transfer on the substrate to be printed in order to establish the correct operative conditions and to be sure of the achievable results.

We also suggest to stir the product before the use and carefully follow the instructions written on the label and on the material safety data sheet enclosed with the products.

Furthermore, we strongly remind you that the ink performance can vary according to the type of printer, type of ink feeding system, type and gr for sqm of the paper and finally on polyester fabric used in the final application.


The information contained in this information sheet are based on our present experience and knowledge. In consideration of the various factor which can effect the results achived in the final application ATPColor Srl does not take any responsibility for an unproper use of the product by the user which can violate or damage rights of third parties.





ATPColor Srl, Via Mascagni, 42 - 20030 Senago (MI) Italy - -  PIVA/VAT IT04034890964